Natural cork patterns with a white stain.
Notice: We strongly recommend two layers of our Top Layer Polyurethane to protect the floor’s surface.
Special Materials Required: Glue down flooring tiles require the use of Wakol D3540 cork adhesive and enough Loba 2K polyurethane to achieve two (2) coats of finish.
Must Read Glue Down Cork tiles
Bleached Birch Cork Glue-Down Flooring
The calm of a birch forest, cast in 100% cork: creamy off-white planks threaded with delicate ribbons of tan, gray, and light slate.
Bleached Birch is part of the Birch Collection. It has an off-white base, grey and light slate tones, and a linear pattern resembling birch bark.
Each tile is 100% cork at a full 5/16 in (8 mm) thickness, cut into 12 in x 24 in (305 x 610 mm) square-edged planks. There is no bevel and no groove line: once glued down, the floor reads as one large finished unit rather than a grid of tiles. Because the tile itself is 100 percent low-density, sound-absorbing cork, no separate underlayment is required.
Underfoot, this is where cork earns its reputation. It can look like textured hardwood, gives softly like carpet, and cleans up as easily as vinyl. Its honeycomb cell structure holds about 50 percent air, so the surface feels warm the moment you step on it, and its natural elasticity relieves strain on feet, legs, joints, and back. It shrugs off common scratches, absorbs the shock of dropped objects, and recovers its texture quickly.
It is also a floor you can feel good about. Cork is harvested from the bark of the cork oak, which regrows its outer bark every 9 to 10 years without harm to the tree, making this a genuinely renewable, sustainable material. Rated for both residential and light commercial use, and prefinished in a high resistance Natural Shield water-based polyurethane finish, Bleached Birch is at home in kitchens, bathrooms, bedrooms, and basements alike.
This tile cannot be sanded or refinished. If the surface needs renewing, the factory finish can be lightly abraded and recoated with water-based polyurethane. Solara is the only solid cork floor tile we offer.
Why this floor
- 100% cork: a full 5/16 in (8 mm) of low-density, sound-absorbing cork, so no separate underlayment is needed.
- Published cork acoustic data lists 10 to 20 dB for thicknesses of 3 to 12 mm. Review the specific tested floor assembly before applying those values to a project.
- Rated Commercial class 31 and Domestic class 23, suitable for busy homes and light commercial spaces.
- Made with formaldehyde-free adhesives. Review the product’s emissions documentation.
- Honeycomb cell structure with about 50 percent air content insulates naturally, helping reduce winter heating costs and keeping the surface warm for bare feet.
- Square-edged tiles in a 12 in x 24 in format.
- Backed by a 10-year residential wear warranty, a joint integrity warranty, and a lifetime structural warranty. Made in Portugal.
Important product note
Polyurethane is required after installation. Glue-down tiles, including white and stained colors such as Bleached Birch, need two site-applied coats of Loba 2K water-based polyurethane over the whole floor once the adhesive has set. This seals the seams between tiles and completes the wear surface, so plan for enough polyurethane to cover the full installed area with two coats.
































Toby G. (verified owner) –
Laid 380 sq ft of this in the kitchen over an existing vinyl floor. Rolled it properly and there’s no lifting at the edges. Six months in and it looks like week one.
Luis A. (verified owner) –
Went down over 5/8 ply in the shop office and it has held. 710 sq ft went down with almost no waste. Delivery split across two days, which slowed the job. Tile is good, the wait on glue was the annoyance.
Annette W. (verified owner) –
Bought these for the kitchen because it takes the traffic. Rolled it properly and there’s no lifting at the edges. Six months in and it looks like week one.