Ships USA-wide
Natural cork patterns with a grey-white stain for a combination of traditional and modern look for your floor..
Notice: We strongly recommend two layers of our Top Layer Polyurethane to protect the floor’s surface.
Special Materials Required: Glue down flooring tiles require the use of Wakol D3540 cork adhesive and enough Loba 2K polyurethane to achieve two (2) coats of finish.
Must Read Glue Down Cork tiles
Ceramic Marble Cork Glue-Down Flooring
A soft white cork tile with the look of polished marble: back by popular demand.
Ceramic Marble is a white and soft gray stained cork tile that reads like ceramic or marble underfoot, without the cold, hard feel of stone. It was one of the first colors offered in 1/4 in (6mm) glue-down cork, and after a run of natural tones dominating the lineup, the shift toward whites and soft grays has brought this favorite back into stock.
The tile is 100% cork, 1/4 in (6mm) thick. That 100% cork build is what gives a glue-down floor its quiet, warm, cushioned feel while staying low-profile enough to glue directly to a prepared subfloor.
Each tile arrives with a high resistance Natural Shield water-based polyurethane finish, square edges, no bevel, and a straight-cut profile, so the installed floor reads as a clean, continuous surface. On site, two coats of Loba 2K polyurethane seal the seams and complete the wear surface.
Rated Commercial class 31 and Domestic class 23, Ceramic Marble is at home anywhere in the house and in light commercial spaces, and it can be installed on walls as well as floors.
This tile cannot be sanded or refinished. If the surface needs renewing, the factory finish can be lightly abraded and recoated with water-based polyurethane. Solara is the only solid cork floor tile we offer.
Why this floor
- Commercial class 31 and Domestic class 23 durability rating: suitable for light commercial traffic, not just residential rooms.
- 100% cork at a full 1/4 in (6mm) thickness.
- Stained white and soft gray marble look that pairs a stone aesthetic with cork's warmth.
- High resistance Natural Shield water-based polyurethane finish factory finish; two site-applied coats of Loba 2K polyurethane complete the system.
- Square edge, no bevel, straight-cut profile for a continuous installed surface.
- 22 sq ft per carton in 11 tiles (2 sq ft per tile), with only 5% recommended cutting overage.
- Backed by a 10-year residential wear warranty, joint integrity warranty, and lifetime structural warranty.
See it in action
Other formats
Ceramic Marble is also available as a 12mm floating floor plank with click-lock installation.
Flooring
Wall & Ceiling Tiles
Cork Underlayment
Supplies & Guides
Corinne H. (verified owner) –
Did the back entry with these tiles, 380 sq ft, one afternoon with a roller. Sits flat, no lippage between tiles. Holds up to work boots better than the vinyl it replaced.
Cora T. (verified owner) –
Laid 320 sq ft of this in the basement office over 5/8 ply. The Ceramic Marble is neutral, not plasticky in daylight. Second room we’ve done with it.
Ann Thomson –
Love this cork floor. Looks beautiful, seems to have helped my knees. I have this in my kitchen and love it. Makes our small kitchen look bigger.