Bright Stone

Bright Stone Techslate Stone-Look Flooring

Swiss-designed stone-look planks that are highly water resistant, rated for heavy commercial traffic, and quiet underfoot. Bright Stone brings the pale, luminous look of natural slate to a 19/64 in (7.5 mm) plank that behaves nothing like cold stone. The pattern is applied with direct, lightfast digital printing (lightfastness rated above 7), so the light stone tones stay true even in sun-washed rooms, and a micro bevel on every edge gives each plank crisp, tile-like definition. Under the surface, a mineral carrier plate core sits between a highly viscoelastic intermediate layer and a GREEN Sound impact underlay, all sealed under a ceramic-reinforced wear coating. The result is a floor that measures 0.00 mm residual indentation, swells 0% after 24 hours in water, and still improves room acoustics by about 35%. Because the format is engineered for large open areas, you can run Bright Stone up to 10,000 sq ft without visible transition strips: one continuous, seamless surface through kitchens, hallways, and open-plan spaces. Planks click together with the click-lock profile and float over the subfloor, so installation is a realistic DIY project. Rated Commercial Class 33, it is as much at home in restaurants, hotels, offices, and retail spaces as it is in busy family homes.

Why this floor

• Water-resistant construction: 0% thickness swelling after 24 hours (EN 317), suited to bathrooms and other high-moisture areas; basements need proper moisture planning.
• AC5 abrasion rating with more than 10,000 wear cycles, plus Commercial Class 33 (EN 16511) for the heaviest traffic.
• Quiet underfoot: approximately 19 dB impact sound reduction and up to 35% room sound improvement.
• Fire classification A2fl-s1, one of the strictest reaction-to-fire classes for flooring.
• Safe surface: R10 slip resistance, Class DS, and antistatic below 2.0 kV.
• Ceramic-reinforced finish resists scratches (MSR-A1/MSR-B1), stains (grade 5/5), chemicals, and heat.
• Made from 100% natural materials, renewable and recyclable, with emissions below 100 ppm per AgBB.

---

See it in action

---

Important product note

This floor is finished with a ceramic-reinforced surface finish that makes Techslate flooring tougher, more water-resistant, and easier to clean while preserving its comfort, warmth, and quiet performance. You can read more on our What is the ceramic-reinforced coating page.