White Leather

White Leather Cork Flooring

A crisp white floating cork floor with a leather-block pattern that keeps white from ever turning bland. White Leather is one of the whitest whites available in cork, delivered as a 1/2 inch (12 mm) floating plank. Flooring trends have moved on from greige and gray toward whites and off-whites, and this floor lands squarely in that moment. The leather-block pattern gives the crisp white surface subtlety and interest: a little patch of white here, a quick stab of blue there, so the floor reads clean and modern without going flat. Under the stained white face sits a full sandwich of comfort: a 1/8 inch (3 mm) cork top layer over a 1/4 inch (6 mm) E1 class high density fiberboard core, with a 1/8 inch (3 mm) cork underlay already attached. The planks click together with the industry-leading Uniclic profile, so the floor floats over your subfloor without glue or fasteners. That double layer of cork is what you feel every day. It stays warm and comfortable underfoot, insulates against thermal swings (keeping unwanted heat out in summer and warmth in the room in winter), and its resilient, low-slip surface is kind to seniors, children, and anyone dealing with arthritis or joint pain. It also quiets a home, stopping noise from traveling down through the floor or up through the ceiling below. If you want the same look in a bathroom, a matching 6 mm White Leather glue-down tile lets you carry the pattern from your main floor into wet-area rooms and continue the modern feeling throughout the home.

Why this floor

• Impact Insulation Class IIC 55, measured on 5.5 inch concrete without a suspended ceiling, with an impact noise reduction of 19 dB (ISO 140-8).
• Industry-leading Uniclic click-lock profile: a true floating installation with an attached 1/8 inch (3 mm) cork underlay, no separate underlayment needed.
• Rated Domestic class 23 and Light Commercial class 52, backed by a 10-year residential wear warranty, a joint integrity warranty, and a lifetime structural warranty.
• Finished with a high-resistance Natural Shield water-based polyurethane wear layer; the surface is stain resistant and impact resistant.
• Made with formaldehyde-free adhesives, and completely natural, recurring, and replenishable material.
• Naturally resistant to insects, mold, and mildew thanks to cork's anti-microbial properties; hypo-allergenic and repels dust, hair, and other small particles, a well-being alternative to carpet.
• Warm underfoot insulation that helps you save on heating and cooling bills.

---

See it in action

---

Important product note

Because White Leather is a stained colored product, polyurethane must be applied after installation. This finishing step applies to stained and white colored floating floors; it protects the color and completes the installation. If you want this pattern in bathrooms, use the matching 6 mm White Leather glue-down tile, which lets you match wet-area rooms to your main floor and keep a consistent look through the home.