Vintage Stone

Vintage Stone Techslate Stone-Look Flooring

The character of weathered slate with a warmth and quiet that real stone can never give you: waterproof, rated A2fl-s1 for fire, and built for Class 33 commercial traffic. Vintage Stone captures the aged, time-worn look of natural slate through direct, lightfast digital printing on a rigid mineral carrier plate. You get the visual depth of stone in a 19/64 in (7.5 mm) plank that clicks together and floats over your subfloor, with no mortar, no grout, and no cold feet. The construction does the heavy lifting. A highly viscoelastic intermediate layer sits over the mineral core, and a GREEN Sound impact underlay is bonded underneath, so each step lands soft and quiet instead of the hard clack of ceramic. On top, the KORUS ceramic-reinforced coating adds toughness, water resistance, and easy cleaning without giving up that comfort. Because the core is mineral (cement fiberboard), the plank is fully waterproof and exceptionally stable: swelling after 24 hours in water is 0%, and dimensional movement is under 0.03%. That stability lets installations run up to roughly 10,760 square feet (1,000 m²) without expansion or separation joints, so large open floor plans stay seamless. Rated for commercial Class 33 and residential Class 23, Vintage Stone is at home in busy venues like cafes, offices, and hospitals as much as in kitchens, entries, and family rooms. And when its service life ends, the floor is designed to be dismantled easily and is fully recyclable through a second-life process.

Why this floor

• Fully waterproof mineral core: 0% thickness swelling after 24 hours in water (EN 317) and 0.00 mm residual impression (EN 433).
• Rated for heavy commercial traffic (Class 33) and all residential areas (Class 23), with abrasion performance above 10,000 revolutions (WR4 / AC5).
• Quiet underfoot: approximately 19 dB impact sound improvement (EN ISO 717-2) plus 35% in-room sound reduction (IHD-W-31) from the built-in GREEN Sound underlay.
• A2fl-s1 fire classification (EN ISO 9239-1), a top-tier result for a floating floor.
• Dimensional stability under 0.03% allows runs up to about 10,760 sq ft (1,000 m²) with no expansion or separation joints.
• Lightfastness above 7 on the 8-point ISO 105 scale, so the color stays vibrant even in sun-drenched rooms.
• Uniclic click joints tested to over 500 kg per running meter of pull strength (ISO 24334), with low emissions under 100 ppm per AgBB and GreenGuard Gold certification.

---

See it in action

---

Important product note

This floor is finished with KORUS Protection, a ceramic-reinforced surface coating that makes Techslate flooring tougher, more water-resistant, and easier to clean while preserving its comfort, warmth, and quiet performance. Read more about the finish at What is KORUS.