Earthy Pine

Earthy Pine Natural Composite Flooring

Forna Natural Composite in a warm pine tone, built on a waterproof hydrowood core that clicks together and floats over your subfloor.

Earthy Pine brings the muted, natural warmth of pine to a floor built with a natural linseed composite surface: linseed oil, pine resin, limestone, cork wood flour, and jute. It is natural linseed composite surface, not a vinyl print, so the color runs with the character of the material rather than a repeating photo layer.

Each 3/8 in (9.5 mm) plank is a three-part sandwich: a 1.5 mm natural linseed composite wear surface over a 6.8 mm waterproof hydrowood core, finished underneath with 1.2 mm of agglomerated cork. The core swells less than 1% after 24 hours in water (EN 317), and the cork backing quiets footfall while adding thermal comfort, cutting impact sound by roughly 18 dB.

Rated commercial class 33, Earthy Pine is built for busy spaces: shops, offices, and hard-working family homes alike. The Uniclic click-lock profile floats the planks together without glue or nails, and the surface is sealed with a hardwearing water-based polyurethane so it shrugs off abrasion, stains, and rolling chairs.

Lightfastness rating: above 7 (ISO 105). UL GREENGUARD Gold certified for low chemical emissions. Follow the product’s sunlight and maintenance guidance.

Why this floor

• Waterproof Hydrowood core: less than 1% swell after 24 hours in water (EN 317), with a high-strength Uniclic click joint rated at over 650 kg/lfm locking strength (ISO 24334).
• Commercial class 33 durability (EN 16511) with a 5-year commercial warranty, plus domestic class 23 with a 15-year residential warranty.
• Quiet underfoot: the natural linseed composite layer and 1.2 mm pressed cork backing reduce impact sound by about 18 dB (EN 140).
• Fade resistant: lightfastness greater than 7 on the ISO 105 scale, so colors hold up under extensive sun exposure.
• Underfloor heating compatible, with a low thermal resistance of 0.09 m² K/W (EN 12524) for efficient heat transfer.
• Made from linseed oil, pine resin, limestone, cork wood flour and jute. Review the UL GREENGUARD Gold and AgBB emissions documentation.
• Tough surface: micro scratch resistance MSR-B1 (EN 16094), stain resistance grade 4-5 (EN 438-2), suitable for type W castor chairs (EN 425), and R10 slip resistance (EN 51130).

See it in action