Walnut Burlwood

Walnut Burlwood Cork Flooring

A dark walnut-tone cork floor with warm brown highlights that shift with the light, built on a full 1/2 inch (12 mm) Uniclic click-lock plank.

Walnut Burlwood is the strong, silent type: a dark cork floor you can use where a mid-tone would normally go. Packed with warm brown highlights, it shows two sides of its personality depending on the lighting. In low light it reads deep and dark; in full light the burlwood pattern dazzles and the color comes alive.

That mix of warm browns and cool undertones makes this floor easy to place in rooms that juggle multiple themes. Renovating usually means compromising between old and new, and when several wood tones already live in the space, Walnut Burlwood offers a simple way to tie them together.

Underfoot, this is a floating plank with real substance: a 1/8 inch (3 mm) natural cork wear surface over a 1/4 inch (6 mm) E1-class high density fiberboard core, with a 1/8 inch (3 mm) cork underlay already attached. The result is warm, quiet, and resilient, with a low-slip surface that is kind to seniors, children, and anyone with arthritis or joint pain.

Cork is a healthy choice too: hypo-allergenic, it repels dust, hair, and other small particles, making it a well-being alternative to carpet. It resists insects, mold, and mildew thanks to cork’s natural anti-microbial properties, and the planks are made with formaldehyde-free adhesives, an ecologically friendly floor from a completely natural, renewable material.

Why this floor

• Industry-leading Uniclic click-lock profile for a glue-free floating installation.
• Impact Insulation Class IIC 55 (tested on 5.5 in concrete without a suspended ceiling) and 19 dB impact noise reduction per ISO 140-8: sound stays out of the rooms below.
• Three-layer construction: 1/8 in (3 mm) natural cork top over a 1/4 in (6 mm) E1-class high density fiberboard core, with a 1/8 in (3 mm) cork underlay attached, so no separate underlayment purchase.
• Rated Domestic class 23 and Light Commercial class 50, so it handles busy homes and light commercial spaces.
• High-resistance Natural Shield water-based polyurethane wear layer: stain resistant, impact resistant, and easy to clean.
• Natural thermal insulation keeps unwanted heat out in summer and holds warmth in winter, helping trim heating and cooling bills.
• Backed by a 10-year residential wear warranty, a joint integrity warranty, and a lifetime structural warranty.

See it in action

Specifications

Technical data

Common questions

How is it installed?

Walnut Burlwood is a floating floor with the Uniclic click-lock profile: planks click together over your subfloor with no glue or nails. The 1/8 in (3 mm) cork underlay is already attached to each plank, so there is no separate underlayment to buy or lay down.

Can it handle kids, pets, and heavy traffic?

It is rated Domestic class 23 and Light Commercial class 50, so it is built for the busiest rooms in a home and for light commercial use. The high-resistance Natural Shield water-based polyurethane wear layer is stain resistant and impact resistant, and the resilient, low-slip cork surface is gentle on joints.

Will it help with noise between floors?

Yes. This plank delivers a 19 dB impact noise reduction (ISO 140-8) and an Impact Insulation Class of IIC 55 tested on 5.5 in concrete without a suspended ceiling. Cork keeps noise from transmitting down through the floor or up through the ceiling.

How much should I order?

Each carton holds 6 planks and covers 17.44 sq ft. Measure your room, then add the recommended 10% overage for cuts and waste.

Important product note

Walnut Burlwood is also available as an 8 mm glue-down tile in the same pattern. That means you can run the same look throughout connected spaces, such as a floating floor in the master bedroom and the matching glue-down tile in the en suite.

Info & Guides

• Installation details
• Warranty
• DIBT Cork Certificate
• CE Declaration of Conformity
• Safety Datasheet Cork
• VOC and Formaldehyde test report