Earthy Pine

Earthy Pine Linoleum Flooring

Real Swiss linoleum in a warm pine tone, built on a waterproof hydrowood core that clicks together and floats over your subfloor.

Earthy Pine brings the muted, natural warmth of pine to a floor made almost entirely from renewable raw materials: linseed oil, pine resin, limestone, cork wood flour, and jute. It is genuine linoleum, not a vinyl print, so the color runs with the character of the material rather than a repeating photo layer.

Each 3/8 in (9.5 mm) plank is a three-part sandwich: a 1.5 mm linoleum composite wear surface over a 6.8 mm waterproof hydrowood core, finished underneath with 1.2 mm of agglomerated cork. The core swells less than 1% after 24 hours in water (EN 317), and the cork backing quiets footfall while adding thermal comfort, cutting impact sound by roughly 18 dB.

Rated commercial class 33, Earthy Pine is built for busy spaces: shops, offices, and hard-working family homes alike. The Uniclic click-lock profile floats the planks together without glue or nails, and the surface is sealed with a hardwearing water-based polyurethane so it shrugs off abrasion, stains, and rolling chairs.

Sunlight is not a problem either. With a lightfastness rating above 7 (ISO 105), the pine tones stay vibrant even in rooms with heavy sun exposure, and UL GREENGUARD Gold certification means low emissions and healthier indoor air.

Why this floor

• Waterproof Hydrowood core: less than 1% swell after 24 hours in water (EN 317), with a high-strength Uniclic click joint rated at over 650 kg/lfm locking strength (ISO 24334).
• Commercial class 33 durability (EN 16511) with a 5-year commercial warranty, plus domestic class 23 with a 15-year residential warranty.
• Quiet underfoot: the linoleum composite layer and 1.2 mm pressed cork backing reduce impact sound by about 18 dB (EN 140).
• Fade resistant: lightfastness greater than 7 on the ISO 105 scale, so colors hold up under extensive sun exposure.
• Underfloor heating compatible, with a low thermal resistance of 0.09 m² K/W (EN 12524) for efficient heat transfer.
• Healthy and natural: made from linseed oil, pine resin, limestone, cork wood flour, and jute, UL GREENGUARD Gold certified for low emissions, and tested according to AgBB.
• Tough surface: micro scratch resistance MSR-B1 (EN 16094), stain resistance grade 4-5 (EN 438-2), suitable for type W castor chairs (EN 425), and R10 slip resistance (EN 51130).

See it in action