Water-based Poly – Loba 2K Supra A.T. Litre

Important: These liquids are temperature-sensitive and will fail if exposed to temperatures less than 5 degrees Celsius (40F). We take steps to avoid merchandise from freezing during transportation. The customer is responsible for bringing all liquids inside at the time of delivery and inspecting them upon arrival. Please open the carton to ensure the product is still in liquid form. iCork Floor must be contacted within 48 hours of delivery if the product arrives “frozen” (in a solid condition – not liquid) or damaged. Failure to notify iCork Floor within 48 hours of damaged/frozen goods prohibits the customer from pursuing a replacement claim with iCork Floor or Forna. Purchases of liquids such as adhesive and polyurethane are non-refundable and we are not giving refunds for liquids.

Must Read Before Apply loba Water Based Polyurethane

Coats required

Coverage

135-155 square feet per litre for one coat.

Description:

The “Advanced Technology” says it all. The Supra AT is fundamentally different from any other 2 part finish on the market. It is also very different from Loba’s previous 2K Supra.

The Supra AT required the development of a new polymer type. This new polymer allows the permanent suspension of the ceramic particles. This prevents the dreaded “settling” that is problematic in the finishing business.

The body of the Supra AT (the polymer itself) offers its own exceptional durability, chemical and slip resistance. Because the ceramic particles are covered in a special nano-coating, they combine with the polymer to create extraordinary elasticity. The ceramic particles themselves offer outstanding scratch resistance. Both of which are extremely important in the cork industry.

Along with an updated polymer formula, increased scratch and dent resistance, Loba 2K Supra AT offers a new bench mark in dry-times and cure rates. Supra AT can handle shoe traffic after 24 hours. Even compared with other fast drying water based finishes, Supra AT’s 5 day “full cure” rate is outstanding.

Attention Clients: Please be aware there are special requirements when shipping/purchasing cork glue down tiles and the liquids during winter months.

Recommended use

Recommended use:
Loba 2K Supra AT is suitable for high traffic areas in both a commercial and busy residential setting. It is suitable for cork (unfinished and factory finished) and hardwood. It can be used (in conjunction with WS 2K Contact) to recoat factory finished wood and cork floor coverings.

• Water based polyurethane formulated for extreme wear
• Exceptional scratch resistance
• Excellent build up through high solid content (ceramic infused nanoparticles)
• Non yellowing (clear coat)
• Roll-on application that is self-levelling and self-correcting (non-foaming)
  Coverage

Loba Supra AT – Advance Technology: Reviews from Clients

Data

• Technical Information
• Sustainability data sheet
• EMICODE certificate
• FIBA certificate
• Safety data sheet loba 2k supra at
• Safety data sheet Supra A.T. satin Hardener

150-160 sf per Litre (150sf per quart)

How to apply