Natural cork patterns with a white stain.
Notice: We strongly recommend two layers of our Top Layer Polyurethane to protect the floor’s surface.
Bleached Birch Cork Flooring
A soft, milky off-white with gray undertones that gives you the painted-floorboard look with the warmth and quiet of 1/2 inch (12mm) cork.
Bleached Birch is off-white with grey, light blue and creamy beige tones. Compare a sample in the room’s lighting before ordering.
Under the color is a full 1/2 inch (12mm) floating plank: a 1/8 inch (3mm) cork wear surface over a 1/4 inch (6mm) E1 class high density fiberboard core, with a 1/8 inch (3mm) cork underlay already attached. Planks click together with the industry-leading Uniclic profile, so the floor floats glue-free over your subfloor while the built-in cork underlay quiets footfall from the first step.
The pattern and color have been so popular that they are also reproduced in 6mm and 8mm glue-down cork tiles, so you can carry the same floor into bathrooms, kitchens, and entrance ways where a glue-down tile makes more sense.
Why this floor
- Impact Insulation Class IIC 55, tested on 5.5 inch concrete without a suspended ceiling, plus 19 dB impact noise reduction (ISO 140-8): noise stops transmitting down through the floor or up through the ceiling.
- Full 1/2 inch (12mm) build: 1/8 inch (3mm) cork top layer, 1/4 inch (6mm) E1 class high density fiberboard core, and 1/8 inch (3mm) attached cork underlay.
- Uniclic click-lock profile for a glueless floating installation.
- Rated Domestic class 23 and Light Commercial class 35, backed by a 10-year residential wear warranty, a joint integrity warranty, and a lifetime structural warranty.
- Insulates against thermal fluctuations: it keeps unwanted heat out in summer and holds warmth in the room in winter, which saves on heating and cooling bills.
- Cork provides a warm, resilient surface underfoot. Check the product’s traffic rating and care instructions.
- Made with formaldehyde-free adhesives. Review the product’s emissions documentation.
See it in action
Important product note
Bleached Birch is a stained colored product, so polyurethane is required after installation. This site-applied topcoat protects the stained surface and seals the joints; plan for it as part of your installation.


























Reviews
No reviews yet. Be the first to share your experience with this product.