Slat Perla

Slat Perla Acoustic Cork Wall Panels

Natural cork slats in a soft pearl tone that quiet a room the moment they go up: a sculpted 3D wall with a sound rating to back up the look.

Slat Perla brings the modern slat-wall look to natural cork in a pearl tone. Each panel carries a run of raised cork slats that catch light and shadow across the surface, so a plain drywall expanse turns into a textured feature wall or ceiling with real depth.

The construction does the acoustic work. A 25/64 in (10mm) layer of natural cork slats sits over a slim 1/8 in (3mm) MDF core, and behind that a 5/32 in (4mm) anti-vibration cork layer decouples the panel from the wall. The ridged 3D face diffuses sound instead of bouncing it straight back, while the cork mass absorbs it: the system reaches a Delta IIC improvement of up to 42 dB.

That combination suits the rooms where noise actually bothers you: home offices and media rooms, bedrooms shared with a loud hallway, or light commercial spaces like studios, meeting rooms, and reception areas. Cork is naturally hypoallergenic and adds thermal insulation as well, so the wall feels warmer to the touch and the room easier to live in.

Each panel measures 48 27/64 in x 17 21/64 in (1230 x 440 mm) and covers 5.83 sq ft, so a six-panel carton finishes 34.95 sq ft of wall or ceiling.

Why this wall

• Soundproofing you can measure: Delta IIC improvement of up to 42 dB, with the sculpted 3D slat face adding maximum sound diffusion.
• Three working layers: 25/64 in (10mm) natural cork slats, 1/8 in (3mm) MDF core, and a 5/32 in (4mm) anti-vibration cork backing.
• Low-emission core: the MDF layer is compliant with the California Air Resources Board CARB Phase 2 standard.
• Rated for light commercial use, not just residential walls.
• Installs on ceilings as well as walls, so you can treat the two largest sound-reflecting surfaces in a room.
• Natural cork is hypoallergenic, fire-resistant, and adds thermal insulation to the surface it covers.
• Backed by a 5-year warranty against manufacturing defects.