Slat Dark Natural

Slat Dark Natural Cork Wall Panels

Dark cork slats for acoustic wall treatment.

Slat Dark Natural takes the slat-wall look and builds it entirely around cork. Rich, dark natural cork strips run the length of each 48 27/64" x 17 21/64" (1230 x 440 mm) panel, giving you a warm, three-dimensional feature wall with real texture instead of a printed pattern.

Each panel is a true acoustic sandwich, 43/64" (17 mm) thick in total: 25/64" (10 mm) solid cork slats on the face, a 1/8" (3 mm) MDF core that is CARB Phase 2 compliant (California Air Resources Board), and a 5/32" (4 mm) anti-vibration cork layer on the back. The ridged surface scatters sound while the layered build blocks it, with an impact sound improvement rated at up to Delta IIC 42 dB.

Review the acoustic report and installation requirements before choosing these panels for offices, media rooms, bedrooms, restaurants or reception areas.

Panels install on walls or ceilings, and each one covers 5.83 sq ft, so a single 6-panel carton handles 34.95 sq ft of surface. Order about 10% extra for cuts and you are set.

Why this wall

• Three-dimensional slat surface engineered for maximum sound diffusion, breaking up echo instead of bouncing it back.
• Published Delta IIC impact-sound improvement: up to 42 dB. Review the tested floor assembly and applicability to the proposed installation.
• Layered acoustic build: 25/64" (10 mm) natural cork slats over a 1/8" (3 mm) MDF core, finished with a 5/32" (4 mm) anti-vibration cork backing.
• Low-emission core: the MDF layer is CARB Phase 2 compliant per the California Air Resources Board.
• Natural cork provides thermal insulation. Review the selected product’s fire rating and emissions documentation.
• Rated for light commercial spaces, on walls and ceilings alike.
• Backed by a 5-year warranty against manufacturing defects.

See it in action