Clara Chevron

Clara Chevron Cork Flooring

A chevron pattern in real cork: warm underfoot, 18 dB quieter, and rated for commercial class 33 traffic.

Clara Chevron brings a classic chevron look to a floor made from natural cork, harvested from the bark of the cork oak without felling a single tree. The bark regrows, and a single oak can be peeled up to 20 times over a lifespan of up to 200 years, so the pattern you walk on every day comes from one of the most sustainable materials in flooring.

Each 7/16 in (11 mm) plank is built in three layers: a 3 mm cork top layer over a 6.8 mm E1 grade moisture resistant HDF core, finished with a 1.2 mm agglomerated cork backing. The surface is sealed with a HotCoating wear layer and a high resistant Natural Shield water base polyurethane finish, which is how this floor reaches AC5 abrasion resistance and a class 33 commercial rating.

Underfoot, cork's honeycomb cell structure (roughly 40 million cells per cubic centimeter) makes the floor permanently elastic and thermally insulating. It stays at a comfortable temperature all year, so walking barefoot in winter no longer means cold feet, and the natural give is easy on ankles and joints. That same elasticity makes it a strong choice for a home gym as well as living areas.

Installation is a floating click lock system: the patented Uniclic profile locks planks into tight, watertight joints with no glue and no open seams. It asks a little more of you during install (a 20 cm, about 8 in, taping block keeps the edges pristine), and rewards that effort with a secure, stable floor.

Why this floor

• Impact sound reduction of 18 dB (EN ISO 717-2), thanks to cork's honeycomb cell structure and the agglomerated cork backing layer.
• Rated commercial class 33 and domestic class 23 (EN 16511), with AC5 abrasion resistance from the HotCoating surface protection.
• Patented Uniclic click lock with watertight joints that surpasses standard click systems and eliminates open joints.
• Three-layer construction: 3 mm natural cork wear surface, 6.8 mm E1 grade moisture resistant HDF core, 1.2 mm agglomerated cork underlayment built in.
• Natural thermal insulation from approximately 40 million air-filled cells per cubic centimeter, for an even floor temperature year round.
• Low emissions: in conformity with AgBB, with GreenGuard Gold and formaldehyde test documentation available below.
• 15 year residential and 5 year commercial warranty.

See it in action

Important product note

The click system on this floor is an adapted Uniclic profile that exceeds European Standards and surpasses standard click versions: it locks watertight, eliminates open joints, and keeps the floor stable. The trade-off is a slightly more deliberate installation. Always tap planks together with a 20 cm (about 8 in) taping block rather than striking the plank edge directly, so the locking profile and edges stay undamaged and the floor keeps its pristine appearance.